Rain triggers infection events, extends leaf wetness duration and spreads spores. In 2025, with more peak showers, there is no room for guessing; you need local data. A weather station with rain gauge puts you ahead: you see exactly when and how much rain falls on your field, you link that to leaf wetness and temperature, and you act in time. The KNMI (the Dutch national weather service) also shows that rainfall extremes in the Netherlands have increased in many statistics, which increases your disease pressure and shortens your reaction time.
Why rainfall measurement is so decisive
Fungal diseases need three things: spores, a susceptible crop and suitable conditions. Rain is the accelerator; it brings moisture to the leaf and starts the clock. For apple scab, 6 to 23 hours of continuous leaf wetness is often enough, depending on temperature: the warmer, the shorter. These are practical thresholds that you link directly to local measurements.
If you want to understand when condensation already poses a risk, also read our piece on the dew point; it helps you interpret leaf wetness periods and drying time better.

What you should measure in the field as a minimum
With a weather station in agriculture you measure rainfall amount and intensity, humidity, temperature and preferably leaf wetness. That combination is the basis for infection models and for simple, clear decisions such as whether or not to spray, and whether or not to irrigate.
Our TRACIS software links this sensor data so that you see infection events coming early instead of correcting afterwards. In the fruit sector, growers use TRACIS for things such as leaf wetness duration, dew point and warnings for scab or botrytis.
How rainfall measurement works against the main problems in fruit
Apple scab and pear scab
Rain releases spores and produces wet leaves. The well-known Mills criteria link temperature to the hours of leaf wetness needed for infection. In practice, this means that at 10 to 24 degrees, 6 to 12 hours of wet leaves can already be enough. If you get new measurable rain within the same 24 hours, a new wet-period block starts. With local rain gauges and leaf wetness sensors you limit the number of unnecessary sprays and miss fewer real infection events.
Botrytis in soft fruit and during flowering
Botrytis often strikes around flowering, with symptoms appearing later. Petals stay wet longer in rain and mist, spores germinate faster and infections increase. Warning systems use rainfall, leaf wetness and temperature to predict peak pressure. With rainfall measurements on your own field, you move from calendar spraying to risk-based working.
Splash damage and secondary spread
Spores travel via wind and rain splash. Every shower can fling infected material onto healthy parts, especially with a dense canopy. That is exactly why local rainfall intensity counts, not just total millimetres.
Tactics you can apply straight away
- Measure locally, not generically
Place a weather station with rain gauge in or next to your orchard. Regional apps miss microclimate and timing, which masks infection windows. See our orchard solution for a complete picture of soil moisture, leaf wetness and air. - Link rain to leaf wetness and temperature
Set thresholds based on Mills hours, for example an alert at 6 hours of wetness at 16 to 24 degrees. TRACIS gives you a signal so that you do not overshoot the critical limit. - Plan prevention around real risks
Look at the 48-hour forecast together with your own rainfall trend. Peaks or successive showers, the well-known Dutch showery weather, call for timely protective spraying or, on the contrary, waiting until after a wet block. - Check follow-up and secondary rounds
After an infection period you need to act within the curative window. Rainfall measurements help determine whether you are dealing with a new wet period or whether the drying time has been sufficient. - Be ready for extremes
Cloudbursts cause splash dispersal and structural water problems. Monitor intensity, not just mm per day. Also read our explanation of cloudbursts. The KNMI confirms the trend towards more and heavier showers, which makes hyperlocal management more important.
Set-up and quality of your measurements
Place the rain gauge clear of trees and buildings, level with the tree canopies or as the manufacturer advises, make sure it is horizontally aligned and clean it periodically. Combine it with a leaf wetness sensor in the canopy and a temperature and RH sensor at crop height. This lets you map wet windows and drying time realistically, instead of at 10 metres high or kilometres away.
In summary
Rain is the on switch for many fungal problems. By measuring rainfall precisely, you link local showers to leaf wetness and temperature, you see infection events in time, you protect more selectively and you save inputs. With a weather station with rain gauge and TRACIS you run your orchard on data instead of feel. Start with the foundation: measure locally, act on signals.
Want to know more or get started straight away? Take a look at our solution for orchards or read why a weather station in agriculture makes the difference.
Read also: controlling and preventing powdery mildew in fruit growing.



