Extreme rainfall is becoming more common in the Netherlands, and one phenomenon growers need to take seriously is the cloudburst. This is a very heavy downpour in which more than 10 to 30 mm of rain can fall per 5 minutes in a short time. For farmland and orchards, that is not normal rain; it is a potentially devastating natural phenomenon.
What happens during a cloudburst?
During a cloudburst, rainfall intensity can be so high that natural drainage cannot cope. The result: surface run-off of fertile topsoil, water erosion in rows or planting beds and, in low-lying parts, a risk of root suffocation due to oxygen shortage.
According to an analysis by the KNMI (the Dutch national weather service), cloudbursts have become significantly more frequent in recent decades. Because of climate change and warmer air layers, showers can hold more moisture, resulting in higher rainfall peaks. The KNMI radar analysis shows that these showers often occur locally and unpredictably: one field has to deal with waterlogging while a neighbouring field stays dry.
Cloudbursts are increasing: recent examples and the climate trend
Cloudbursts are no longer rare extremes. Because of climate change, their frequency and intensity are increasing, with direct consequences for agriculture, soil structure and infrastructure.
A striking example occurred on 23 July 2025 in Vlaardingen (the Netherlands), where no less than 55 mm of rain fell within two hours. Streets flooded, and orchards in the region reported soil saturation, root stress and fruit drop. Events like this are no longer exceptions but signs of a structural shift in our rainfall pattern.
According to meteorological data from the KNMI, among others, there has been a clear increase since 2000 in the number of cloudburst days per year in Western Europe. In the Netherlands, the threshold for a cloudburst is ≥25 mm per hour or ≥10 mm in 5 minutes. This limit is being exceeded more and more often – especially in the summer months, when warm, moist air masses suddenly rise and condense into extremely heavy showers.
How does a cloudburst form? Meteorology in practice
A cloudburst forms when warm, moist air rises quickly and comes into contact with cold upper air layers. This collision causes water vapour to condense suddenly into heavy rain clouds (cumulonimbus). If the rising air is strong enough, the precipitation process keeps building up over a small area, so that enormous amounts of rain fall in a short time.
The characteristic of a cloudburst is that the drainage of rainwater cannot keep pace with the intensity of the rainfall. The water can literally ‘fall out of the sky’ at rates of more than 25 mm per hour, often without prior warning. An additional effect is that these showers are often accompanied by gusts of wind, hail or thunder – factors that increase the impact on orchards even further.
For fruit growers it is crucial to understand these meteorological mechanisms. A cloudburst is not a random phenomenon, but a weather situation that becomes predictable under certain conditions.
Why cloudbursts matter for fruit growers
For fruit growing, this trend means higher disease pressure, accelerated leaching of nutrients and disruption of soil structure. Especially with young trees or fields with less permeable soils, the risk of root rot or slower growth is real.
With sensor data from FieldGuard you can quickly detect deviations in soil moisture, oxygen balance and evaporation capacity, even before damage becomes visible. That way you anticipate climate extremes with data, instead of reacting to damage.
What can you do as a grower about cloudbursts?
-
Prevent soil compaction: this lets rainwater infiltrate faster.
-
Work with ditches and swales: good drainage is essential.
-
Use FieldGuard sensors: with the rain gauge you see exactly how much rain falls per hour, per day or per shower. The soil moisture sensors show immediately how quickly (or not) the water is absorbed into the soil, crucial information for intervening when the soil is waterlogged.
-
Choose a row layout with natural drainage: avoid dense sealing layers.
-
Think about restoring soil structure after cloudbursts: with organic matter, green manures or shallow cultivation.

How quickly should you respond after a cloudburst?
After a cloudburst, every hour counts. Water that falls from the sky in a few minutes can stand for hours or days if the soil does not infiltrate quickly. For you as a grower it is crucial to check the field visually within 6 to 12 hours of a heavy shower and to look at the measurement data from your sensors.
Is water visible between the rows? Then quick drainage is needed to prevent root suffocation and erosion. A topsoil that stays saturated for too long also leads to compaction when driven on by machinery – an effect you will notice later in the season as slower growth and yield loss.
With FieldGuard you see in real time whether the water is draining away or standing. The soil moisture sensors show exactly at what depth the saturation is and how quickly it decreases. So you know not only that rain has fallen, but also what the soil is doing with it. That information determines whether or not you need to intervene – smartly, in a targeted way and on a sound basis.
Cloudbursts are no longer far-off stories; they are here now. Make sure that as a farmer or grower you are prepared, not only once the water is already running into the ditch.
Not all rain is the same: types of precipitation and their impact
Rain comes in different forms, and not every shower has the same impact on your orchard. For fruit growers it is important to know the difference, because the type of rain determines how quickly the soil saturates, whether there is a risk of erosion and how the plants respond to moisture load.
1. Drizzle (light precipitation)
Drizzle consists of very fine droplets that fall slowly and evenly. This form of precipitation mainly wets the leaf surface and the upper soil layer, but rarely causes saturation or run-off. Drizzle does, however, keep humidity high for long periods – a risk for fungal growth such as mildew or scab.
2. Stratiform rain (steady rainfall)
This rain is typical of elongated frontal systems and can last for hours. The droplets are larger than with drizzle, but the intensity is low to moderate. Although the rain falls slowly, it can still lead to saturation on poorly draining soils. For young plantings or shallow-rooting fruit varieties, this is a point of attention.
3. Convective showers (local showers)
These arise from rapid warming of the earth’s surface and are often short, intense and local. They bring large droplets and high intensity, which can lead to run-off, soil splash on leaves and mechanical damage to flowers or young fruit.
4. Cloudbursts (extreme convective precipitation)
The heaviest form of precipitation. Cloudbursts deliver tens of millimetres of rain in a short time, with all the associated risks: waterlogging, oxygen shortage in the root zone and leaching of minerals. Mudflows, erosion gullies and damage to the structure of the orchard often result.
Why does this distinction matter?
With FieldGuard you measure not only the amount of rainfall, but also its intensity and duration. That information helps you distinguish between a ‘wet day’ and a ‘risk day’ – and that is where the difference lies in effective disease prevention and soil health.



