Home » Soft fruit » Measuring groundwater levels: understanding and managing them in agriculture

Measuring groundwater levels: understanding and managing them in agriculture

grondwater stand, grondwaterstand meten, grondwater nederland, grondwater meter, grondwaterstand meter,

The groundwater level is a decisive factor for agriculture, nature and water management in the Netherlands. For farmers and growers, groundwater is literally the foundation under the field: it affects root development, soil structure and ultimately yield. With more extreme weather, such as longer droughts and heavy rainfall, it is becoming increasingly important to measure the groundwater level rather than rely on experience alone.

In this blog you will read what the groundwater level is, why groundwater in the Netherlands plays such a big role and how a groundwater level meter gives you more control over water management in agriculture.

What is the groundwater level?

The groundwater level indicates how high the groundwater is relative to the ground surface. This level changes continuously under the influence of rainfall, evaporation, soil type and interventions such as drainage or irrigation. On sandy soils the groundwater level can fluctuate quickly, while clay and peat areas respond more slowly but are more sensitive to structural changes.

It is precisely this dynamic that makes it difficult to manage by feel. A single visual check or past experience often says little about the current situation below ground.

Measuring groundwater levels in the Netherlands: crucial for agriculture and soil quality

Groundwater in the Netherlands is under increasing pressure. In wet years, a high groundwater level can cause oxygen shortage at the roots and hamper field work. In dry years, a groundwater level that is too low leads to crop stress, lower nutrient uptake and reduced yields.

For farms, this means that good water management is becoming more and more important. Not only to prevent damage, but also to use irrigation and drainage more efficiently. Reliable insight into the groundwater level is the key.

Measuring groundwater levels: from estimate to certainty

Measuring the groundwater level is the only way to establish objectively what is happening below the surface. Measurements show whether a field responds quickly to rainfall, how deep the groundwater falls during drought and whether changes are temporary or structural.

Traditionally, this is done using a monitoring well (piezometer) in which the groundwater level is determined. Increasingly, it is done with digital solutions that measure and record automatically. This gives a continuous picture of the groundwater level without the need for manual checks.

What is a groundwater level meter?

A groundwater level meter is an instrument that records the level of the groundwater in a monitoring well or measuring point. Modern groundwater level meters measure accurately and record measurements over a longer period. This shows not only the current situation but also how it develops through the season.

For agriculture, measuring the groundwater level concretely means that decisions about irrigation, drainage and field planning can be better substantiated. Instead of reacting to damage, you can look ahead and adjust in time.

Groundwater level meters in farming practice

In practice, a groundwater level meter provides insight at field level. That is essential, because differences within a farm can be large. Where one field dries out quickly, another stays wet for a long time.

By measuring the groundwater level structurally, you see patterns emerge. You know when irrigation is really needed and when it is not, and you can match drainage better to the actual situation in the soil. This prevents unnecessary water use, saves costs and contributes to healthier soil.

Measurement data also provides substantiation for advisers, water boards and certification schemes. Decisions are no longer based on assumptions, but on concrete measurement data.

From measuring to managing: control over water management

A groundwater level meter makes the step from measuring to managing possible. By combining current and historical data, you gain calm and overview in an increasingly unpredictable climate. You see not only what is happening now, but also how your fields respond to different weather conditions.

For farms, this means more certainty, less risk and better control over water management.

How to measure the groundwater level in four steps

  1. Choose representative measuring points. Place a monitoring well in a spot that suits the field: not right next to a ditch, drain or hollow, unless you specifically want to see that influence.
  2. Install the well to below the lowest groundwater level. A perforated pipe with a filter lets groundwater flow in and out freely, so that the water level in the pipe matches the groundwater around it.
  3. Measure relative to the ground surface. Record the depth of the water level below the surface in centimetres. Manually you do this with a dip meter or measuring tape; an automatic groundwater level meter (a pressure transducer or data logger in the pipe) records the level continuously.
  4. Compare over the season. Only after a series of measurements do you see how quickly your field responds to rainfall and drought. In the Netherlands, the mean highest and lowest groundwater levels (GHG and GLG) are often used for this.

Groundwater level and soil moisture complement each other: the groundwater level tells you how deep the water is, soil moisture how much water is available in the root zone. With FieldGuard sensors you measure at different depths, from the root zone to groundwater level. Take a look at the monitoring stations and the soil moisture sensor. You can find public measurement series for your region (in the Netherlands) at Grondwaterstanden in Beeld.

Conclusion

The groundwater level largely determines how soils function and how crops develop. In a country like the Netherlands, where water has always been a decisive factor, it is becoming increasingly important to manage it in a targeted way. By measuring the groundwater level with a reliable groundwater level meter, you gain insight into processes that would otherwise remain invisible.

Would you rather stop working on assumptions and know what the groundwater level on your fields is actually doing?
Then request information about a groundwater level meter, with no obligation, and discover how easy it is to gain structural insight into your soil and water balance.

Contact

Questions about this topic?

Would you like to know how to measure or apply this in your own business? We are happy to think along with you, with no obligation, and we respond quickly.

Request a quote

Leave your details and we will get in touch.

More from the knowledge base

Scroll to Top