Home » Soft fruit » Recognising and controlling powdery mildew in fruit trees

Recognising and controlling powdery mildew in fruit trees

Ziekte bij fruitbomen, meeldauw, meeldauw bestrijden, fruitboomziekten herkennen, ziekte bij fruitbomen

Mildew is one of the most persistent diseases that can affect fruit trees such as apple, pear and cherry. This fungal disease occurs in two forms: powdery mildew and downy mildew. Both forms suppress growth, inhibit photosynthesis and can seriously damage the harvest. The cause often lies in a combination of high humidity, limited ventilation and susceptible crops.

In this article you will learn how to recognise mildew, what the ideal conditions for infection are and – most importantly – how to act preventively. Whether you work with organic products such as milk or neem oil, or rely on data-driven decisions via FieldGuard sensors and RIMpro, effective control starts with knowledge and timing. Controlling mildew: this is how you keep your orchard healthy and productive.

What you need to know about mildew in fruit trees

Powdery mildew vs downy mildew

Mildew in fruit trees can occur in two forms: powdery and downy mildew. Powdery mildew (such as Podosphaera leucotricha) shows up on the upper side of leaves and young shoots as a white powdery layer that can be wiped off. Downy mildew, on the other hand, causes yellow patches on the upper side and a downy fungal growth on the underside, in other words an oily-looking haze.

Both diseases weaken the tree, but require a different treatment approach: powdery mildew often responds better to sulphur-based products, while downy mildew calls for specific foliar feeding or systemic products.

Ideal conditions for mildew

Mildew develops best at temperatures between 20 °C and 25 °C and relatively high humidity of 80–90%. A lack of ventilation within the canopy means that humid air lingers. Note the difference between the two forms: powdery mildew does not need wet leaves to infect – warm days with high humidity are enough. Downy mildew, by contrast, needs prolonged leaf wetness. Trees planted close together or where overhead irrigation is used are therefore at extra risk of downy mildew and other leaf-wetness diseases.

Recognising mildew in apple, pear and other fruit

Visual symptoms on leaves and fruit

On the leaves and shoots of apple and pear trees, mildew often shows as a fine white powdery layer (powdery mildew) or yellow spots with fungal growth on the underside of the leaf (downy mildew). Young leaves become distorted and flowers can be misshapen. Mildew on fruit is rarer but can be recognised by a subtle fluffy layer. In early stages the infection is still easy to control. Recognised late = harder to control.

Disruption of growth and photosynthesis

Mildew inhibits photosynthesis because the fungus covers the leaf surface, slowing down carbon dioxide exchange. Leaves stay small, shoots stop growing and the leaves become more brittle. The result: reliable yields and even fruit set fail to materialise. You often see infection build up over time; without intervention, disease pressure rises steadily.

Preventing mildew: preventive measures

Cultural practices: pruning, fertilisation, ventilation

An open canopy structure is crucial. Prune in late winter or early spring so that rain can dry faster and air circulates well. Avoid over-fertilisation, especially with nitrogen, because soft growth is more susceptible to fungal infections. Adequate planting distance and mulch help regulate moisture around the trees.

Organic products: neem oil, baking soda, milk

  • Neem oil has an antifungal effect and inhibits spore development.

  • A milk solution (for example 1 part milk to 9 parts water) can inhibit the development of mildew spores.

  • Baking soda, combined with a little crop oil, raises the pH on the leaf surface and slows fungal growth. These products work best preventively, before visual symptoms appear.

(success not guaranteed)

Chemical fungicides: when to use them?

Only use chemical products when there is infection pressure and after monitoring via sensor data or visual inspection. Commonly used products are sulphur preparations and other fungicides specifically authorised against mildew; check current authorisation (in the Netherlands, in the database of the Ctgb, the Dutch authorisation board). Important: spray before the fungus spreads strongly; that is more effective than reacting afterwards. Always check authorisation for fruit and respect pre-harvest intervals.

Preventing mildew with FieldGuard technology

Monitoring humidity and leaf wetness

FieldGuard stations continuously measure crucial parameters such as relative humidity, leaf wetness duration and soil moisture in your orchard. By mapping these accurately, you gain insight into the conditions that favour mildew.

Warnings from sensor data before infection periods

Through integration with RIMpro models, FieldGuard can give alerts at moments when conditions are ideal for a mildew outbreak. This warning comes before visual symptoms appear, so that you can act preventively.

Reducing chemical use through correct timing

Because FieldGuard provides insight into precise risk moments, you can use fungicides effectively and in a targeted way. This reduces unnecessary use, lowers the environmental burden and increases returns. Please note: FieldGuard is not an agronomist, but a tool that provides data. Successful control also requires knowledge of products, timing schedules and proper execution.

Conclusion: controlling and preventing mildew

Mildew is a common disease in fruit trees that can have a serious impact on growth, harvest and returns. By understanding the difference between powdery and downy mildew, acting preventively with cultural practices and organic products, and intervening chemically at the right moments, you significantly reduce disease pressure.

The added value of FieldGuard technology lies in real-time monitoring of risk conditions and targeted warnings via the RIMpro link. This allows growers to act in time, without spraying blindly, and so prevent disease outbreaks. Although technology provides support, good practical knowledge and alertness remain indispensable.

Would you like to protect your orchard against mildew, with higher yields and less chemical pressure? Request a demo from FieldGuard and discover how sensor data helps you manage fruit tree diseases preventively.

FAQ – questions from fruit growers

1. What is powdery mildew and how does it differ from downy mildew?
Powdery mildew forms a white powdery layer on the upper side of leaves. Downy mildew causes spots with fungal threads on the underside.

2. When is the risk of mildew infection highest?
At temperatures of 20–25 °C, humidity of 80–90% and poor air circulation in the canopy.

3. How effective is milk against mildew?
Milk works as a preventive spray: the proteins inhibit spore development, especially if you spray before infection.

4. Can you prevent mildew completely with FieldGuard?
No, FieldGuard provides data support. Success also depends on execution, timing and knowledge. FieldGuard links with RIMpro, but does not replace an agronomist or practical experience.

5. Do I always need to use chemical products against mildew?
No. Only use chemicals when infection pressure is high or an outbreak is imminent. Organic products and good cultural practices are often effective enough as a first measure.

Contact

Questions about this topic?

Would you like to know how to measure or apply this in your own business? We are happy to think along with you, with no obligation, and we respond quickly.

Request a quote

Leave your details and we will get in touch.

More from the knowledge base

Scroll to Top