Dry-bulb temperature is a term that regularly comes up in weather data and climate systems. For many growers it is a familiar value on their monitoring station, but what exactly does it mean? And why is it important to understand this temperature properly – especially in combination with wet-bulb temperature?
In this article we explain what dry-bulb temperature is, how it is measured and how it differs from other types of temperature. We also look at its practical meaning for fruit growers and other sectors.
What is dry-bulb temperature?
Dry-bulb temperature is the temperature of the ambient air, measured with a normal thermometer without evaporation influencing the result. The measurement usually takes place in a ventilated housing, so that sunlight and radiant heat do not distort the outcome. Dry-bulb temperature is the standard value used in weather forecasts and climate control systems.
How is this temperature measured?
A reliable dry-bulb measurement requires a stable measuring set-up. The thermometer or sensor must be protected from direct sunlight and well ventilated. The sensor is dry and measures the air as it really is, without additional influences from moisture or condensation.
What is the difference between dry-bulb and wet-bulb temperature?
Dry-bulb temperature only tells you how warm or cold the air is. Wet-bulb temperature, on the other hand, also takes evaporation into account. That evaporation causes cooling. At lower humidity, more water evaporates from leaves or flower buds, for example, so the crop itself cools faster than the surrounding air. Wet-bulb temperature is therefore always lower than dry-bulb temperature, unless the air is completely saturated.
This difference is crucial. The dry-bulb temperature can be above zero while the crop – because of evaporation – is already freezing. Only by measuring both values can you assess the real risk.
Why is this important for fruit growers?
In fruit growing, everything revolves around timing and prevention. During a cold, dry night the air may still be 1 or 2 degrees above zero, but the crop itself cools faster through evaporation. This causes unexpected frost damage to blossom or young fruit, without a standard thermometer raising the alarm.
Many growers then look at the dry-bulb temperature, in other words the ‘ordinary’ air temperature. But that does not tell the whole story. The real risks arise precisely when the crop itself drops below freezing, and for that the wet-bulb temperature is crucial. It measures how quickly heat is lost through evaporation, and so gives a more realistic picture of how your crop is cooling.
The wet-bulb temperature shows when the bud temperature actually drops below zero. That is the moment you need to act: irrigate, cover or heat. By measuring both dry-bulb and wet-bulb temperature, you get a much more precise picture of the frost risk. That way you can anticipate better, prevent damage and only use water and energy when it is really needed.
An example from practice
Suppose that early in the morning you measure a dry-bulb temperature of 2 degrees Celsius and a humidity of 55 per cent. The corresponding wet-bulb temperature is then around zero degrees. In this case the temperature of the flower buds drops to freezing point, while the air temperature does not yet show this. Without insight into the wet-bulb temperature you would miss this moment – with all the consequences that entails.
Relevance beyond fruit growing
Although fruit growers benefit directly, dry-bulb temperature is also important in other sectors. In cold stores, this temperature determines whether the product is sufficiently cooled. In glasshouses it is a reference value for climate computers. In HVAC installations it forms the basis for heating, cooling and ventilation settings. And in industrial production environments, a stable dry-bulb temperature is essential for process safety and product quality.
What can you do with dry-bulb temperature in practice?
By combining dry-bulb temperature with measurements of humidity and wet-bulb temperature, you get a complete picture of the climate. This lets you set alarms, optimise climate settings and prevent damage. Especially in automated systems, you can manage smartly on the moment real risk arises – instead of relying on air temperature alone.
Summary
Dry-bulb temperature is the standard air temperature, measured without the influence of evaporation. For fruit growers it is a useful basic value, but only in combination with wet-bulb temperature do you get a realistic picture of the moment when crops can really freeze. In other sectors too – such as storage, climate control and ventilation – this temperature is indispensable for good management and prevention.
Measuring dry-bulb temperature with TRACIS from FieldGuard
Measuring both dry-bulb and wet-bulb temperature requires accurate, reliable and easy-to-use measuring equipment. FieldGuard’s TRACIS system has been developed specifically for this. This innovative sensor platform gives growers real-time insight into temperature, humidity, dew point and evaporation-related risks.
With TRACIS you have:
-
An accurate sensor configuration for dry-bulb and wet-bulb temperature
-
Robust field hardware that can be used 24/7 in all weather conditions
-
Intuitive data display via an online dashboard or mobile app
-
Automated frost alarms and climate analyses
For fruit growers this means better-informed decisions, lower water use and maximum protection of the harvest. Whether it is night frost during blossom, condensation prevention in the cold store or climate optimisation in a polytunnel – TRACIS gives you control over your growing conditions, based on reliable data.
Would you like to know how TRACIS can strengthen your business too? Get in touch for a no-obligation demo or tailored advice.



